Crewkerz WAW AS30 Crankset

– High-quality Crewkerz WAW AS30 Crankset with BB, Bashring, and additional add-ons available.

– Features a through-axle system that sees the right-hand crank arm and BB axle constructed as one piece, reducing weight whilst increasing stiffness.

A unique axle system also allows for an oversized bottom bracket axle, improving strength.

– New forged crank arms are CNC machined to remove excess material, whilst still being strong.

– Splined freewheel interface eradicates the often difficult task of removing threaded freewheels.

– The assembly is pre-loaded by the large black 5mm allen key bolt and then held in place with a pinch bolt in the non-drive side crank.

– Please note that the pre-load bolt requires little torque. This is used only to pre-load the bearings, and so should only be “nipped” in place. Damage caused by over-tightening is not covered by warranty. The black, M6 pinch bolt should be tightened to 10Nm maximum to keep the crank in place, and this should be checked regularly.

– Notched bashring design ensures it will not slip around the crank when hit.

– Available in an anodized black finish, matched with an anodized black axle and BB cups.

– Length: 160mm, 165mm, 170mm, 175mm.

– Please note, bashring is available only for 170mm and 175mm versions.

Weights: 570g – 615g